奇米777,久久久久黑人强伦姧人妻,先锋影音av在线,18禁国产精品久久久久久KTV

詠繹電子科技（蘇州）有限公司

產品名稱：數字存儲示波器GDS-3000系列

產品型號：

產品報價：

產品特點：全系列 頻寬覆蓋350MHz范圍, 提供2/4輸入通道
* 可選擇50Ω/75Ω/1MΩ三種不同的輸入阻抗
* 可選配功率量測軟件以進行電源質量測試與分析
* 可選配串行總線的觸發、譯碼功能.軟件可支持I2C, SPI以及UART
* 雙取樣模式: 5GSa/s實時取樣率及100GSa/s等效取樣率
* 強大的VPO訊號處理技術，快速洞察異常信號

數字存儲示波器GDS-3000系列的詳細資料：

 
GDS-3152
GDS-3154
GDS-3252
GDS-3254
GDS-3352
GDS-3354
Vertical　
Input Channels
2Ch+EXT
4Ch+EXT
2Ch+EXT
4Ch+EXT
2Ch+EXT
4Ch+EXT
Bandwidth
DC~150MHz（-3dB）
DC~250MHz（-3dB）
DC~350MHz（-3dB）
Rise Time
2.3ns
1.4ns
1ns
Vertical Resolution 8 bits
Vertical Resolution@ 1MΩ 2mV~5V/div
Vertical Resolution@ 50/75Ω 2mV~1V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF
DC Gain Accuracy ±（3% X |reading| + 0.1div+ 1mV）
Polarity Normal and inverted
Maximum Input Impedance @1MΩ 300V （DC+AC peak）, CAT I
Maximum Input Impedance @50/75Ω 5 Vrms ,CAT I
OffsetPositionRange 2mV/div ~ 100mV/div: ±0.5V
200mV/div ~ 5V/div: ±25V
Bandwidth Limit
20MHz （-3dB）
100MHz （-3dB）
200MHz （-3dB）
Waveform Signal Processing Addition, Subtraction, multiplication, division, FFT, FFTrms
Trigger　
Source Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
Trigger Mode Auto （Auto （supports Roll Mode for 100 ms/div and slower）, Normal, Single
Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay （1~65,535） events, Time-Delay（10nS~10S）, I2C, SPI, UART
TriggerHold-off Range 10ns~10s
Coupling AC, DC, LF rej, HF rej, Noise rej
Sensitivity DC~50MHz approx. 1div or 1.0mV
50MHz~150MHz approx. 1.5div or 15mV
150MHz~350MHz approx. 2div or 20mV
EXT Trigger　
Range ±15V
Sensitivity DC~150MHz pprox.100mV
150MHz~250MHz approx. 150mV
250MHz~350MHz approx. 150mV
Input Impedance 1MΩ±3%, ~16pF
Horizontal　
Range 1ns/div~100s/div （1-2-5steps）; ROLL: 100ms/div~100s/div
Pre-Trigger 10div maximum
Post-Trigger 1,000div
Accuracy ±20 ppm over any ≧1 ms time interval
Signal Acquisition System　
Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s
Equivalent Time Sample Rate 100GSa/s maximum for all models
Record Length 25k points
Acquisition Mode Normal, Average, Peak Detect, High resolution, Single
　 Normal: Acquire sampled values
　 Average: From 2 to 256 waveforms included in average
　 Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
　 Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
X-Y Mode　
X-axis input Channel 1; Channel 3
Y-axis input Channel 2; Channel 4
Phase Shift ±3° at 100kHz
Cursors and Measurement　
Cursors Amplitude, Time, Gating available
Automatic Measurement 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements （FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF）
Cursors Measurement  ?V, ?T
Auto Counter 6digits, range from 2Hz minimum to the rated bandwidth
Power Measurements （optional）　
Power Quality Measurements VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements Vripple, Iripple
In-rush Current First peak, second peak
Control Panel Functions　
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Auto-Range Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
Save Setup 20 sets
Save Waveform 24 sets
Display System　
TFT LCD 8" TFT LCD SVGA color display （LED backlight）
Display Resolution 800 horizontal × 600 vertical （SVGA）
Interpolation Sin（x）/x and equivalent time sampling
Waveform Display Dots, Vectors, Variable persistence, infinite persistence
Display Graticule 8 x 10 divisions
Display Brightness Adjustable
Interface　
RS-232C port DB-9port
USB port 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
Ethernet RJ-45 port, 10/100Mbps
VGAVideoPort DB-15port, SVGA monitor output
Line Output 3.5mm stereo output jack for Go/NoGo audio alarm
GPIB（Optional） USB to GPIB converter
Go/NoGo BNC Maximum 5V /10mA TTL open collector ouput
Kensington Style Lock Rear panel security slot connects to standard Kensington style lock
Power Source　
LineVoltageRange AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
Miscellaneous 
Multi-language Menu Available
On-line Help Available
Time clock Time and Data ,Provide the Data/Time for saved data
Dimensions and Weight 400（W） x 200（H） x 130（D）, approx. 4 kg.
 
GDS-3152
GDS-3154
GDS-3252
GDS-3254
GDS-3352
GDS-3354
Vertical　
Input Channels
2Ch+EXT
4Ch+EXT
2Ch+EXT
4Ch+EXT
2Ch+EXT
4Ch+EXT
Bandwidth
DC~150MHz（-3dB）
DC~250MHz（-3dB）
DC~350MHz（-3dB）
Rise Time
2.3ns
1.4ns
1ns
Vertical Resolution 8 bits
Vertical Resolution@ 1MΩ 2mV~5V/div
Vertical Resolution@ 50/75Ω 2mV~1V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF
DC Gain Accuracy ±（3% X |reading| + 0.1div+ 1mV）
Polarity Normal and inverted
Maximum Input Impedance @1MΩ 300V （DC+AC peak）, CAT I
Maximum Input Impedance @50/75Ω 5 Vrms ,CAT I
OffsetPositionRange 2mV/div ~ 100mV/div: ±0.5V
200mV/div ~ 5V/div: ±25V
Bandwidth Limit
20MHz （-3dB）
100MHz （-3dB）
200MHz （-3dB）
Waveform Signal Processing Addition, Subtraction, multiplication, division, FFT, FFTrms
Trigger　
Source Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
Trigger Mode Auto （Auto （supports Roll Mode for 100 ms/div and slower）, Normal, Single
Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay （1~65,535） events, Time-Delay（10nS~10S）, I2C, SPI, UART
TriggerHold-off Range 10ns~10s
Coupling AC, DC, LF rej, HF rej, Noise rej
Sensitivity DC~50MHz approx. 1div or 1.0mV
50MHz~150MHz approx. 1.5div or 15mV
150MHz~350MHz approx. 2div or 20mV
EXT Trigger　
Range ±15V
Sensitivity DC~150MHz pprox.100mV
150MHz~250MHz approx. 150mV
250MHz~350MHz approx. 150mV
Input Impedance 1MΩ±3%, ~16pF
Horizontal　
Range 1ns/div~100s/div （1-2-5steps）; ROLL: 100ms/div~100s/div
Pre-Trigger 10div maximum
Post-Trigger 1,000div
Accuracy ±20 ppm over any ≧1 ms time interval
Signal Acquisition System　
Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s
Equivalent Time Sample Rate 100GSa/s maximum for all models
Record Length 25k points
Acquisition Mode Normal, Average, Peak Detect, High resolution, Single
　 Normal: Acquire sampled values
　 Average: From 2 to 256 waveforms included in average
　 Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
　 Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
X-Y Mode　
X-axis input Channel 1; Channel 3
Y-axis input Channel 2; Channel 4
Phase Shift ±3° at 100kHz
Cursors and Measurement　
Cursors Amplitude, Time, Gating available
Automatic Measurement 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements （FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF）
Cursors Measurement  ?V, ?T
Auto Counter 6digits, range from 2Hz minimum to the rated bandwidth
Power Measurements （optional）　
Power Quality Measurements VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements Vripple, Iripple
In-rush Current First peak, second peak
Control Panel Functions　
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Auto-Range Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
Save Setup 20 sets
Save Waveform 24 sets
Display System　
TFT LCD 8" TFT LCD SVGA color display （LED backlight）
Display Resolution 800 horizontal × 600 vertical （SVGA）
Interpolation Sin（x）/x and equivalent time sampling
Waveform Display Dots, Vectors, Variable persistence, infinite persistence
Display Graticule 8 x 10 divisions
Display Brightness Adjustable
Interface　
RS-232C port DB-9port
USB port 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
Ethernet RJ-45 port, 10/100Mbps
VGAVideoPort DB-15port, SVGA monitor output
Line Output 3.5mm stereo output jack for Go/NoGo audio alarm
GPIB（Optional） USB to GPIB converter
Go/NoGo BNC Maximum 5V /10mA TTL open collector ouput
Kensington Style Lock Rear panel security slot connects to standard Kensington style lock
Power Source　
LineVoltageRange AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
Miscellaneous 
Multi-language Menu Available
On-line Help Available
Time clock Time and Data ,Provide the Data/Time for saved data
Dimensions and Weight 400（W） x 200（H） x 130（D）, approx. 4 kg.
 
GDS-3152
GDS-3154
GDS-3252
GDS-3254
GDS-3352
GDS-3354
Vertical　
Input Channels
2Ch+EXT
4Ch+EXT
2Ch+EXT
4Ch+EXT
2Ch+EXT
4Ch+EXT
Bandwidth
DC~150MHz（-3dB）
DC~250MHz（-3dB）
DC~350MHz（-3dB）
Rise Time
2.3ns
1.4ns
1ns
Vertical Resolution 8 bits
Vertical Resolution@ 1MΩ 2mV~5V/div
Vertical Resolution@ 50/75Ω 2mV~1V/div
Input Coupling AC, DC, GND
Input Impedance 1MΩ// 16pF
DC Gain Accuracy ±（3% X |reading| + 0.1div+ 1mV）
Polarity Normal and inverted
Maximum Input Impedance @1MΩ 300V （DC+AC peak）, CAT I
Maximum Input Impedance @50/75Ω 5 Vrms ,CAT I
OffsetPositionRange 2mV/div ~ 100mV/div: ±0.5V
200mV/div ~ 5V/div: ±25V
Bandwidth Limit
20MHz （-3dB）
100MHz （-3dB）
200MHz （-3dB）
Waveform Signal Processing Addition, Subtraction, multiplication, division, FFT, FFTrms
Trigger　
Source Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext
Trigger Mode Auto （Auto （supports Roll Mode for 100 ms/div and slower）, Normal, Single
Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay （1~65,535） events, Time-Delay（10nS~10S）, I2C, SPI, UART
TriggerHold-off Range 10ns~10s
Coupling AC, DC, LF rej, HF rej, Noise rej
Sensitivity DC~50MHz approx. 1div or 1.0mV
50MHz~150MHz approx. 1.5div or 15mV
150MHz~350MHz approx. 2div or 20mV
EXT Trigger　
Range ±15V
Sensitivity DC~150MHz pprox.100mV
150MHz~250MHz approx. 150mV
250MHz~350MHz approx. 150mV
Input Impedance 1MΩ±3%, ~16pF
Horizontal　
Range 1ns/div~100s/div （1-2-5steps）; ROLL: 100ms/div~100s/div
Pre-Trigger 10div maximum
Post-Trigger 1,000div
Accuracy ±20 ppm over any ≧1 ms time interval
Signal Acquisition System　
Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s
Equivalent Time Sample Rate 100GSa/s maximum for all models
Record Length 25k points
Acquisition Mode Normal, Average, Peak Detect, High resolution, Single
　 Normal: Acquire sampled values
　 Average: From 2 to 256 waveforms included in average
　 Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds
　 Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution
X-Y Mode　
X-axis input Channel 1; Channel 3
Y-axis input Channel 2; Channel 4
Phase Shift ±3° at 100kHz
Cursors and Measurement　
Cursors Amplitude, Time, Gating available
Automatic Measurement 28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements （FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF）
Cursors Measurement  ?V, ?T
Auto Counter 6digits, range from 2Hz minimum to the rated bandwidth
Power Measurements （optional）　
Power Quality Measurements VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle.
Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS
Ripple Measurements Vripple, Iripple
In-rush Current First peak, second peak
Control Panel Functions　
Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset
Auto-Range Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point
Save Setup 20 sets
Save Waveform 24 sets
Display System　
TFT LCD 8" TFT LCD SVGA color display （LED backlight）
Display Resolution 800 horizontal × 600 vertical （SVGA）
Interpolation Sin（x）/x and equivalent time sampling
Waveform Display Dots, Vectors, Variable persistence, infinite persistence
Display Graticule 8 x 10 divisions
Display Brightness Adjustable
Interface　
RS-232C port DB-9port
USB port 2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port
Ethernet RJ-45 port, 10/100Mbps
VGAVideoPort DB-15port, SVGA monitor output
Line Output 3.5mm stereo output jack for Go/NoGo audio alarm
GPIB（Optional） USB to GPIB converter
Go/NoGo BNC Maximum 5V /10mA TTL open collector ouput
Kensington Style Lock Rear panel security slot connects to standard Kensington style lock
Power Source　
LineVoltageRange AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection
Miscellaneous 
Multi-language Menu Available
On-line Help Available
Time clock Time and Data ,Provide the Data/Time for saved data
Dimensions and Weight 400（W） x 200（H） x 130（D）, approx. 4 kg.

　如果你對數字存儲示波器GDS-3000系列感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系：

留言框

  • 產品：

  • 您的單位：

  • 您的姓名：

  • 聯系電話：

  • 常用郵箱：

  • 省份：

  • 詳細地址：

  • 補充說明：

  • 驗證碼：

    請輸入計算結果（填寫阿拉伯?dāng)?shù)字），如：三加四=7

詠繹電子科技（蘇州）有限公司專業提供數字存儲示波器GDS-3000系列等產品信息，歡迎來電咨詢！
技術支持：化工儀器網 管理登陸
公司地址：蘇州高新區長江路436號綠寶商務樓2幢7003室   電話：0512-68051240 GoogleSitemap

国产精品成人免费视频一区| 黑人粗大猛烈进出高潮视频 | 国产一区91| 亚洲国产成人久久综合一区| 欧美亚洲日本国产黑白配看| 久久精品人人做人人综合| 国产精品视频免费播放| 黄页网址大全免费观看| 无码国产精成人午夜视频一区二区 | 3D动漫精品啪啪一区二区免费| 国产乱色精品成人免费视频| 国产精品亚洲а∨无码播放不卡 | 中文字幕婷婷| 国产精品夜夜春夜夜爽久久老牛 | 国产精品一区二区久久精品| 欧美丰满熟妇xx猛交| 94久久国产乱子伦精品免费| 亚洲日韩乱码中文字幕| 国产成人亚洲日韩欧美| 亚洲不卡av一区二区无码不卡| 国产成人AV男人的天堂| 亚洲最大无码AV网址| 五月丁香六月综合AV| 国产精品搬运| 男女性杂交内射女BBWXZ| 无码人妻一区二区三区免费手机 | 中文字幕无码免费久久99| 国产精品久久国产精品99盘| 成人午夜精品无码区久久| 亚洲国产精品久久久天堂| 国产精品无码一区二区在线| 日韩国产成人精品视频| 亚洲国产精品成人无码区| 少妇午夜福利一区二区 | 久久线观看免费视频| 超薄肉色丝袜一二三四区| 久久久久久久女国产乱让韩 | 中文无码乱人伦中文视频在线| 四虎成人精品永久免费AV| 久久99精品久久只有精品| 男女肉粗暴进来动态图|